Holby Training - Holby Valve

Holby Training Videos

Holby Piping Diagram Challenges

Holby Brochure
Valve Specifications

Customer Feedback

Jane Doe

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nullam dolor risus, ornare vel gravida ac, fringilla vitae quam. Vestibulum ac ante a magna suscipit facilisis. Aliquam dapibus luctus congue. Donec ac odio ut magna sodales convallis. Sed bibendum velit sit amet est malesuada, eu bibendum lorem volutpat. In et malesuada quam. Nulla finibus iaculis elementum. Morbi pharetra vehicula porta. Nullam velit libero, pellentesque sit amet interdum a, rhoncus at orci. Vivamus et mi lectus. Pellentesque a dolor finibus, fermentum ante quis, vehicula lectus.

John Smith

You’ve decided it’s time for a new master mixing valve. Great choice! But before you can enjoy the benefits of your investment, you need to make sure the installation is done properly. Follow these instructions:

Hot Water Recirculation must be continuous.
Hot Water Recirculation must be piped so the recirculation flow can reach the cold connection of the valve as well as the Heat Source.
Hot Water Rises. Therefore, a thermal loop is required in the Cold line at the connection to the heat source.
The recirculation temperature must be lower than the tempering valve set point.
High temperature recirculation, such as from a kitchen or laundry, must not reach the cold connection of a Master Mixing valve with a lower mixed temperature setpoint.
The valve must be installed to allow for access for service.
Perform routine maintenance.

Making sure your master mixing valve is installed properly is essential for ensuring efficient and accurate water temperature. By following the instructions above, you can be confident that your valve is installed correctly.

The Holby Tempering Valve is a top-of-the-line product that will last for many years. It’s not uncommon for our valves to be in service for more than 50 years, so learning how to properly install and service the valve is critical.